12” Hardwired Power Strip (NO Power Cord), 4 Outlets (NOT Tamper Resistant), with Ears (with mounting tabs on Both Ends), 15 Amp (NOT 20Amp Unit), USB A+C, White

12” Hardwired Power Strip with 4 Outlets, USB A+C - * NOTE: Measurement is approximate: For installation purpose, the length of the power strip unit does not include ears, (mounting tabs 0.67" / 17mm on each end). For models with ears, 2 x 0.67" / 17mm need to be added to the product length in the dimension listed above; the width does not include the size of screws (min. 0.06" / 1.5mm) on each side; the height (or thickness) does not include the receptacles (Regular Outlets: 0.19" / 4.9mm; TR Outlets: 0.25" / 6.3mm) above the surface of the casing. - SAFETY WARNING: - Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer. - Never install this unit during a thunder storm. - Switch off the power before you start installation work. - This unit is for indoor use only. - This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.

• 12” / 0.30m Hardwired Power Strip, 4 Horizontal (NOT TR) Outlets (NEMA 5-15R), USB A+C, White
• With EARS on both Ends, Total Length 13.27” / 337mm
• Measurement: L12″xW1.61″xH1.16″ (305x41x29.5mm); Casing/Outlet Height: 1.16"/0.19" (29.5/4.9mm)
• USB Type A + C: Single Output DC 5V3A/9V2A/12V1.5A, Combined DC 5V3A; Input AC 110-240V/60Hz
• No Power Cord - Hardwired and to be Mounted at Your Desired Location. Installation Instruction Included
• 125V/15A/60Hz (14/3 AWG Wiring); Recommended Max Load 1440W (NOT a 20 Amp Unit)
• ETL Approved and Listed (Conforms to UL 5, 1310 and CAN/CSA C22.2 No. 62)
• 6 Easily Punched off Knockouts, 1 on Each Side - (Top/Bottom Cover, Both Sides/Ends)
• Great for Contractors, Electricians and Installers, as well as DIYers